E10 Roman Split Face Travertine – Super size panels

Super size Roman Split Face Travertine cladding adds an imposing, rugged texture for both internal and external applications. We are specialists in Roman split face travertine cladding, available in super size panels and in a range of travertine colours.

Our Classic Roman E10 selection offers varied warm honey tones. Classic Light, E11 is a paler collection of cream travertine. Dark Noce offers a walnut brown with significant variation of tone.

Standard sizes are 600×400, 600×600, 600×900 and 1200×600. Variables on these dimensions can be produced within 1200×600 . The standard size travertine panels are approx 50-70mm thick on the edge. The face of the stone is extremely varied and thickness will vary  significantly over the face of the stone. This can mean variations of thickness on the face between approx 30-170mm.

We can reduce to 35-50mm thickness on the edge to reduce weight and space requirements.  This can mean variations of thickness on the face between approx 20-130mm.  The thickness will be pre-determined by the hardness of the stone at a particular point .

Super size Roman Split Face Travertine cladding adds an imposing, rugged texture for both internal and external applications. We are specialists in Roman split face travertine cladding, available in super size panels and in a range of travertine colours.

Our Classic Roman E10 selection offers varied warm honey tones. Classic Light, E11 is a paler collection of cream travertine. Dark Noce offers a walnut brown with significant variation of tone.

Standard sizes are 600×400, 600×600, 600×900 and 1200×600. Variables on these dimensions can be produced within 1200×600 . The standard size travertine panels are approx 50-70mm thick on the edge. The face of the stone however, is extremely varied and thickness will vary  significantly over the face of the stone. This can mean variations of thickness on the face between approx 30-170mm.

We can reduce to 35-50mm thickness on the edge to reduce weight and space requirements.  This can mean variations of thickness on the face between approx 20-130mm.  The thickness will be pre-determined by the hardness of the stone at a particular point .

The  panels require mechanical fixing. Holes for mechanical fixing can be pre-drilled to your specifications if required. Tolerance on the panel dimensions is 2-3mm on the length, width and square due to the method of production required.

Super size panels  up to 2500×1200 can be also be produced in limited number. These panels will vary tonally next to each other.

Mitred corners can be cut on site or pre-assembled by the Italian factory. Massive corners can also be produced from blocks if required.

Recent projects include:

  •   a luxury hotel restaurant in Mumbai
  •   a private spa project in Cheshire, UK, with a waterfall .

Other projects undertaken with this material have been as exterior garden features:

  • a split face fountain for a private residence
  • mega thick table slabs with rough hewn sides.

If you have a special project in mind please contact us.

See our Ideabook on Textured Stone Cladding https://www.stone-projects.com/ideabooks/textured-stone-cladding/